The best way to remove embroidery patches from fabrics

Embroidery patches are used for branding purposes, and textile companies represent their brand names and logos by using these patches. Embroidered patches can have pearls and beads when they are made for red carpet dresses, party wear, prom dresses, and wedding gowns. However, sometimes people want to remove these patches that are strongly adhered to the fabric. And it needs careful removal because mishandling can damage your dress as well.

Well, today we are here to tell you how to remove embroidery patches from fabric without affecting your fabric and without a mark. So, keep reading.

How To Remove Embroidery Patches From Fabric

Embroidery patches can be used in different ways. However, some people don’t like it because of personal preferences and want to remove the embroidery patches. It could be due to any reason. For example, they can be itchy or uncomfortable, and they may not be perfectly aligned.

Whatever the reason is, it is extremely important to know the right procedure for removing such patches from fabric. Before removing the embroidery patch it’s necessary to know which type of fabric or garment it is sewn and what type of embroidery patch it is.

Is it a handmade or machine embroidery patch? Because handmade patches are much easier to remove as compared to machine-embroidered patches. Machine-embroidered patches have tight stitches. It’s also necessary to know whether you want to remove the whole patch or just a part of it without damaging the fabric.

To crack this down, we have created a tested method to remove embroidery patches without damaging the fabric

Material Required

  • Seam Ripper
  • Tweezers
  • Magnifying glass
  • Lint Brush
  • Duct tape

A seam ripper is a tiny sewing tool consisting of a handle, head, and shaft used for cutting and removing stitches. The head is forked with a cutting upper surface that is used to rip off the threads attached to the cloth or fabric.

Tweezers remove the tiny threads to give the removal of patches a perfect look. A magnifying glass helps to easily observe and pick the threads from a patch, while a Lint brush removes small threads that cannot be hand-picked.

These materials are required in almost every stitching and embroidery project. Unlike scissors, these materials don’t damage the fabric, and their precision cuts only the desired threads, ensuring the safety of both fabric and patches.

Removing Hand made, and Machine Embroidery Patches

Machine-made embroideries are tighter as compared to hand-made patches, which makes them more challenging to remove. The stitch done by a machine is known as a bobbin stitch, which might require some additional care while performing these steps.

Step 1:

If it is a handmade machine patch, then the first step is to turn the shirt or fabric inside out. Place it on a smooth surface like a table where fabric stretches out. To avoid damaging the fabric, ensure a good light source.

Step 2:

Pick multiple stitches at a time by seam ripper with a gentle hand for hand and try to go underneath about 5 to 6 stitches but for removing machine embroidery patches you need to cut 30 to 40 stitches. Do not use extra force; it will cause damage to the cloth. To cut the stitches apart, lightly push against them.

Step 3:

After ripping the stitches, turn the fabric right side out. And get a tweezer to pull and cut the stitches out. If there’s any resistance then flip the fabric inside out again to figure out the problem and do not proceed to pull before solving the issue as it can damage the patch material.

Step 4:

In the end, figure out that stitch, remove it, and then continue. After removing all the threads, use a lint brush to gather all the loose threads.

Step 5:

After doing all the above-mentioned processes, use duct tape to remove extra pieces.

How To Remove Iron-on Embroidery Patches

Iron-on patches are easy to attach and also easy to remove. You just need to iron on a patch, using a warm iron (not too heated). This is done to warm the glue to easily remove the patch. Save the patch and reuse it.

Remove Leftover Glue:

After removing the patch, there could be some leftover glue on the cloth. To clean it perfectly, use iron at low heat settings. Do not wash the glue with water.

Another solution to get patch glue off the clothes is to put the piece of fabric in the freezer overnight. The glue will become very rigid, allowing you to scrape the glue off of the fabric.

Use of an Eraser to Remove Embroidery Patches

An eraser can also be used to remove an embroidered patch from fabric. Move the eraser across the back of the embroidery edges, and allow it to work on all sides of the embroidery. After completing the first line, move to another one. Roll the eraser until it shaves off all the embroidery boundaries.

Will Removing embroidered Patches From Fabric leave holes?

No doubt removing embroidery patches can leave holes and to avoid this from happening it is suggested to not pull the tiny threads with aggression. After removing patches, remove all the tiny threads and iron the fabric with steam.


Embroidery patches have been used extensively in the clothing industry to add style and glamor to the dress. Some customers do not want too many patches on their shirts, and jackets or sometimes they don’t want to promote the brands they are wearing. That’s why some people demand to remove embroidery patches from their clothes. Now, you can easily remove the embroidery patch at home with the help of this comprehensive guide.

Contact Form Demo